RPM Striker XX Bow

(1 customer review)

$599.99

SKU: N/A Categories: ,
Add to Wishlist

RPM Striker XX Bow Specs

  • Bow Model Specs
    • Striker Lite (Call for Availability): 15–30lb Draw Weight & 26–28.5″ Draw Length
    • Striker Lite XL (Call for Availability): 15–30lb Draw Weight & 28.5–31″ Draw Length
    • Striker: 30–50lb Draw Weight & 26–28.5″ Draw Length
    • Striker XL: 30–50lb Draw Weight & 28.5–31″ Draw Length
  • Weight: 3.2 lbs
  • No CAMS
  • Rubber Grip

The RPM Striker XX upgrades the simplicity of the classic Striker with design enhancements and reduced weight.

Features an aluminum machined riser, yokes, full capture limb pockets, draw stops and saddles and carbon composite string limbs

Options to customize include anodizing the components, anodizing or film dipping the riser, and film dipping the limbs. Custom strings and decals are also available.

Bow Model

Striker, Striker XL

Draw Weight

15–30 lbs, 30–50 lbs

Draw Length

26–28.5", 28.5–31"

Hand

Right Hand

1 review for RPM Striker XX Bow

  1. manuelartadi (verified owner)

    Borkholder is the only retailer I found selling this bow at this price, including RPM direct, so if you’re in the market this is the place to do it. Bow shipped quickly and came assembled, manual was included, no missing parts or damage. The bow needed a teardown for lubing up and hinge screw tightening, but that’s normal for these bows.

    The bow itself has been great so far. I have only been shooting barebow target with it as of now using a Bodoodle Timberdoodle 2 rest. Tried with let-off both on and off, it shoots well either way. I found max poundage with the let-off on to be the most fun to shoot and powerful enough to do the job comfortably.

    My experiences with setup and maintenance so far: I was getting fletching contact on one of the yoke strings upon maxing out the poundage, but that was fixed by rotating out the cable slide to as far as it goes. Be sure to check your arrow clearance when you adjust the poundage. After maxing the limbs, the tiller was also off by about an inch and needed adjustment so be sure to check that too. It’s a bit of a pain to measure tiller accurately but it’s doable. Also the The cable slide screws are kind of dinky, but no other problems on the hardware so far.

    I don’t have experience with other camless lever bows, but I am very happy with what I got. It’s fun to shoot, fun and easy to tune/maintain, looks awesome, turns heads at the range, and it’s extremely affordable. Haven’t taken it bowfishing yet but I can’t see where I might have any problems. Still, if anything turns up after I try it out I’ll see if I can edit this review. Be sure to join the RPM Nitro Nation Facebook group if you’re interested in these bows, you’ll find a lot of answers there to questions you may have about RPM bows and lever bows in general.

Add a review
Shopping Cart
Scroll to Top
Measure Arrow Length - Carbon to Carbon

Why Equalizing the Weight of Non-Lighted Arrows is Important

When choosing Firenock lighted nocks you have an option use the weight match nock system.

There is roughly a 23 grain difference when adding Firenock lighted nocks. It can result in lower impacted points at distances of 30 yards and beyond, and also change your front of center percentages.

There is a simulated weight that attaches to your nock just the same as the lighted nock that will make all of the nocks weigh the same. This will ensure your arrows all fly the same.

Rogue Level 19 String Colors